Stenner Econ FP Series 4.5 GPD Pump, 80 PSI 120V/60Hz (E20PHF81S)

PRODUCT DOCUMENTATION

• Stenner Econ FP Series Pumps Specification
• Stenner Econ FP Series Pumps Manual

The Econ FP is a flow activated pump specifically designed to interface with a dry contact water meter, dry contact flow switch, or a 12-24 VAC/VDC signal from any control equipment that responds to flow.

FEATURES

• Pump is field programmable to accept a dry contact signal or a 12-24 VAC/VDC input signal from any control equipment that responds to flow
• cULus for indoor/outdoor use
• 3-point roller design assists in anti-siphon protection
• Pump head requires no valves, allows for easy maintenance
• Self-priming against maximum working pressure, foot valve not required
• Pump does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• Output volume is not affected by back pressure
• Easy to change pump tube, lubrication is not required

SPECIFICATION

• Part Number: E20PHF81S
• Pump Tube Number: F
• Flow Ratio: 4.5 GPD
• Voltage; 120V/60Hz
• Maximum Working Pressure: 80 psi (5.5 bar)
• Maximum Operating Temperature: 104°F (40°C)

ACCESSORY KIT SHIPPED WITH EACH PUMP

• 3 connecting nuts 1/4"
• 3 ferrules 1/4"
• 1 injection check valve
• 1 weighted suction line strainer 1/4"
• 1 20' roll suction/discharge tubing 1/4" white
• 1 additional pump tube
• 1 manual