Omnipure L Series GAC with Scale Inhibitor Inline Filters

PRODUCT DOCUMENTATION

• Omnipure L Series GAC with Scale Inhibitor Inline Filters (Spec Sheet)

 PRODUCT DESCRIPTION

The Omnipure L Series GAC (Granular Activated Carbon) with Scale Inhibitor Inline Filter are available in 2.5" diameter and 6", 8" 10", 12" & 14" lengths. The E Series in line filters are designed for Chlorine taste and odor removal and Scale buildup prevention. They can be used in icemakers, refrigerators, under the counter, drinking fountains, beverage equipment, Reverse Osmosis (RO) Systems, and in conjunction with commercial purification systems. No glues or binders that may cause contamination are used in the manufacturing process. The components of the Omnipure E Series filters are friction-welded together insuring a no-leak seal. All filters should be installed on cold water lines only. NOTE: Activated carbon filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit. The E-Series was designed for our customers that are already using other existing permanent heads in the market place but would like an affordable alternative to the replacement bodies currently offered. E-series cartridges are also available with Omnipure's proprietary heads. 

SPECIFICATION

• Media: GAC (Granular Activated Carbon) with Scale Inhibitor
• Chlorine Taste and Odor Removal
• Scale Buildup Prevention
• Temperature (ºF) (min/max): 35/100
• Pressure (psi) maximum: 125
• Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I
• Flush new cartridge with 5 gallons of water prior to use and check for leaks.
• Replace cartridge when rated capacity is reached, or when flow becomes too slow
• Install in compliance with state and local laws and regulations

ACCESSORIES

• L5-BRACKET  (Single Bracket-Plastic)
• L5-VH-JJ        (1/4" FQC Valve Head)
• L5-VH-KK      (3/8" FQC Valve Head)
• L5-NVH-JJ     (1/4" FQC Non Valve Head)
• L5-NVH-KK    (3/8" FQC Non Valve Head)