Omnipure K Series All Calcite Acidic Water Neutralizer Inline Filters

PRODUCT DOCUMENTATION

• Omnipure K Series Acidic Water Neutralizer All Calcite Inline Filters (Spec Sheet)

PRODUCT DESCRIPTION 

Omnipure K-Series in Line Replacement Filter Cartridges are the most user friendly inline filter on the market. The K-Series cartridges are ideal for use in any situation where better tasting, sediment and chlorine free water is required. They are a perfect choice for beverage equipment, RO systems, drinking fountains, ice machines, and other point-of-use applications. Standard media includes granular activated carbon for taste and odor reduction, polypropylene depth filtration for removal of grit and sediment, and polyphosphate to control lime and scale deposits. Omnipure K-Series 2” diameter filters are available in 6” and 10” lengths, and the 2.5” diameter filters are available in 6", 8", 10", 12" or 14" lengths. The K-series built on the success of the previous generation of in-line filters. Available with quick connect fittings, as well as female pipe thread, the already simple and effective design can be installed in seconds. Common connections; BB 1/4" FPT, CC 3/8" FPT, JJ 1/4" quick connect, KK 3/8" quick connect, and SS 90 degree elbow quick connect. 

SPECIFICATION

• Filtration Media: Calcite is a crushed and screened white marble
• Used to neutralize acidic or low pH waters to a neutral, less corrosive effluent. 
• Maximum Pressure: 125 PSI
• Temperature: 30-100°F (2-38°C)
• Threaded fittings must be wrapped with Teflon tape before installation
• Install Teflon taped fittings and tighten firmly
• Flush new cartridge with 5 gallons of water prior to use and check for leaks.
• Replace cartridge when rated capacity is reached, or when flow becomes too slow
• Install in compliance with state and local laws and regulations

TYPICAL APPLICATIONS

• Post filtration for RO
• Other point-of-use applications
• Food services