Omnipure E Series GAC T28 Granular Activated Carbon Filter

 PRODUCT DOCUMENTATION

• Omnipure E Series w/T28 Granular Activated Carbon Inline Filters (Spec Sheet)

PRODUCT DESCRIPTION

The Omnipure E Series Inline Filter Cartridges with T28 Granular Activated Carbon (GAC) are available in 2.5" diameter and 6”, 8", 10", 12" & 14" lengths. The E Series with T28 standard coal GAC in line filters are designed for chlorine ad taste and odor removal and can be used in icemakers, refrigerators, under the counter, drinking fountains, beverage equipment, Reverse Osmosis (RO) Systems, and in conjunction with commercial purification systems. No glues or binders that may cause contamination are used in the manufacturing process. The components of the Omnipure E Series filters are friction-welded together insuring a no-leak seal. All filters should be installed on cold water lines only. NOTE: Activated carbon filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit. The E-Series was designed for our customers that are already using other existing permanent heads in the market place but would like an affordable alternative to the replacement bodies currently offered. E-series cartridges are also available with Omnipure's proprietary heads. 

SPECIFICATION

• Chlorine Taste and Odor Removal (Removes more than 95% of disinfectant chlorine)
• Media: T28 Coal Based Standard Granular Activated Carbon 
• Class 1 filtration media
• Everpure Compatible
• Fine filtration of treated drinking water to ingredient water quality
• Help standardize beverage quality at disparate location
• Enhance carbonation
• Reduces maintenance problems in water-using equipment
• Takes out common earthy, fishy, musty, tastes and odors
• Filters out fine particulates, including dirt oxidized iron manganese and sulfide
• Commercial and residential drinking water applications
• Food Services  
• Temperature (ºF) (min/max): 35/100
• Pressure (psi) maximum: 125
• Flush new cartridge with 5 gallons of water prior to use and check for leaks.
• Replace cartridge when rated capacity is reached, or when flow becomes too slow
• Install in compliance with state and local laws and regulations