null

Omnipure CL Series CL6ROT28 & CL10ROT28 Inline GAC Filter Cartridges

SKU:
CL6ROT28 -B
Condition:
New
Weight:
0.50 LBS
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 13 - 24 and get 0.35USD off
Buy 25 or above and get 0.70USD off
  • Omnipure CL Series CL6ROT28 & CL10ROT28 Inline GAC Filter Cartridges
  • Omnipure CL Series CL6ROT28 & CL10ROT28 Inline GAC Filter Cartridges
  • Omnipure CL Series CL6ROT28 & CL10ROT28 Inline GAC Filter Cartridges
8.73USD

Description

PRODUCT DOCUMENTATION

The Omnipure CL Series Inline Filter Cartridges with T28 Granular Activated Carbon (GAC) are available in two sizes: 2” x 6” (CL6ROT28) and 2” x 10” (CL10ROT28). They have three different FPT in /out ports: (1/8”, 1/4” and 3/8”). The CL Series GAC T28 in line filters are designed for chlorine ad taste and odor removal and can be used in icemakers, refrigerators, under the counter, drinking fountains, beverage equipment, Reverse Osmosis (RO) Systems, and in conjunction with commercial purification systems. No glues or binders that may cause contamination are used in the manufacturing process. The components of the Omnipure CL inline filters are friction-welded together insuring a no-leak seal. All filters should be installed on cold water lines only. NOTE: Activated carbon filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit.

SPECIFICATION

  • CL6ROT28-B, CA6ROT28-C, CL10ROT28-A, CL10ROT28-B 7 CL10ROT28-C
  • Chlorine Taste and Odor Removal
  • Dimensions: 2" x 6" CL6ROT28,  2" X 10" CL10ROT28
  • 1/8", 1/4" & 3/8" FPT Connection
  • Media: GAC (granural activated carbon)
  • Temperature (ºF) (min/max): 35/100
  • Pressure (psi) maximum: 125
  • Service Flow Rate: 0.5 GPM, (1.9 LPM)
  • Capacity: CL6ROT28 1000 Gallons, CL10ROT28 1500 Gallons
  • Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I
  • Note flow direction of filter
  • Threaded fittings must be wrapped with Teflon tape before installation
  • Install Teflon taped fittings and tighten firmly
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks.
  • Replace cartridge when rated capacity is reached, or when flow becomes too slow
  • Install in compliance with state and local laws and regulations
  • Case Quantity:  CL6ROT28 50 PCs
  • Case Quantity:  CL10ROT28 25 PCs
View AllClose

Warranty Information

Omnipure Filter Company (Omnipure) warrants that the products delivered will be free from any defects in workmanship or materials. Further, the warranty provided herein applies, only when used within the products specifications and service life, from the date of installation or 5 years from the date of manufacture whichever occurs first, beyond which time or use Omnipure is absolved of any and all liability for any use of the product. In the event of defect or non-conformity, buyer shall promptly notify Omnipure in writing, supplying proof of purchase dates, installation dates, and will protect and retain the products for investigation, or Omnipure is absolved of any and all liability for any use of the product. There are no other warranties, either merchant ability or fitness, either expressed or implied.
View AllClose

Related Products