Acid Neutralizer 1.5 Cu Ft Automatic Back Wash Systems w/Clack WS1 Valve (10" x 54" Resin Tank) FOR FREIGHT COST CALL 1 888 556 8715

Product Documentation:

• Corosex Media Spec Sheet
• Clack WS1 Backwash Control Valve Spec Sheet
• Clack WS1 Manual
• Structural Poly Glass Tank Spec Sheet

 APPLICATION

•  pH Adjustment of Acidic Water. Acid Neutralizer helps prevent corrosion of copper pipes and plumbing fixtures by effectively raising low pH (acidic) water.

SPECIFICATION

• Model: 4023-CCF15-WS1BW-1054  (Automatic Back Wash Acid Neutralizer Systems)
• Media: 1.5 Cu Ft of Corosex 
• Control Valve: Clack WS1 with Clack By Pass & 3/4" Brass (lead free) Connector
• Media Tank: 10" x 54" Poly Glass Dome Hole Tank
• Dimensions: Height 70" (132.1 cm), Diameter 10" (30.5 cm)
• Approximate Weight: 190 lb (111.2 kg)
• Flow Rate: 7 gpm (26.5 lpm)
• Maximum Water Temperatur: 110°F (43.3°C)
• Max. Water Pressure: 100 psi (689 kPa)

 MAINTENANCE

The COROSEX media requires periodic replenishment depending on the amount of water used and the degree of acidity.

The neutralizer should be checked every 3-6 months to make sure that the media is no more than 2” below the media fill line.

The fillport located on the top of the tank permits simple replenishment of the used media.

Whole House System Shipments

Due to weight and some system sizes, most systems are unable to be shipped by local courier(free) and must ship by truckload (LTL).

Canadian Water Warehouse will cover up to $199 on pallet shipments. Customer will be responsible for the tailgate and residential delivery fee. Fees vary depending on location.

Customer will be contacted shortly after placing their order to discuss any shipping fees required for their shipment.